Just another WordPress.com site

Step 1: Cable and connect the network as shown in the topology diagram
a. Connect and configure the devices in accordance with the given topology and configuration.
Routing will have to be configured across the serial links to establish data communications.
b. Configure Telnet access on each router.
c. Ping between Host1, Host2, and Production Server to confirm network connectivity.
Troubleshoot and establish connectivity if the pings or Telnet fail.
 
Step 2: Perform basic router configurations
a. Configure the network devices according to the following guidelines:
  • Configure the hostnames on each device.
  • Configure an EXEC mode password of class.
  • Configure a password of cisco for console connections.
  • Configure a password of cisco for vty connections.
  • Configure IP addresses on all devices.
  • Enable EIGRP on all routers and configure each to advertise all of the connected networks.
  • Verify full IP connectivity using the ping command.
b. Confirm Application Layer connectivity by telneting to all routers.
Step 3: Create firewall rule set and access list statements
Using the security policy information for the FilmCompany remote access, create the firewall rules that must be implemented to enforce the policy. After the firewall rule is documented, create the access list statement that will implement the firewall rule. There may be more than one statement necessary to implement a rule.
Security Policy 1: Remote users must be able to access the Production Server to view their schedules
over the web and to enter new orders.
Firewall Rule: Permit users on the 10.1.1.0/24 access to the Production Server (172.17.1.1) on TCP
port 80.
Access List statement(s): permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 80
Access List placement: Inbound on router SR1 Fa0/1 (remember that extended ACLs should be placed close as possible to the source of the traffic). For each of the following security policies:
a. Create a firewall rule.
b. Create an access list statement.
c. Determine the access list placement to implement the firewall rule.
Security Policy 2: Remote users must be able to FTP files to and from the Production Server.
Firewall Rule: Permit users on the 10.1.1.0/24 access to the Production Server (172.17.1.1) on TCP ports 20 and 21.
Access List statement(s): permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 range 20 21 or two separate access-list statements, each permitting one of the ports.
Access List placement: Inbound on router SR1 Fa0/1 (remember that extended ACLs should be placed close as possible to the source of the traffic)
Security Policy 3: Remote users can use the Production Server to send and retrieve email using IMAP
and SMTP protocols.
Firewall Rule: Permit users on the 10.1.1.0/24 access to the Production Server (172.17.1.1) on TCP ports 143 and 25
Access List statement(s):
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 25
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 143
Access List placement: Inbound on router SR1 Fa0/1 (remember that extended ACLs should be placed close as possible to the source of the traffic)
Security Policy 4: Remote users must not be able to access any other services available on the Production Server.
Firewall Rule: Deny all other IP protocols between users on the 10.1.1.0/24 network to the Production Server (172.17.1.1)
Access List statement(s): deny ip 10.1.1.0 0.0.0.255 host 172.17.1.1.
Access List placement: Inbound on router SR1 Fa0/1
Security Policy 5: No traffic is permitted from individual workstations at the main office to remote worker
workstations. Any files that need to be transferred between the two sites must be stored on the Production Server and retrieved via FTP.
Firewall Rule: Deny all IP protocols from users on the 10.3.1.0/24 to the 10.1.1.0/24 network.
Access List statement(s): deny ip 10.3.1.0 0.0.0.255 10.1.1.0 0.0.0.255
Access List placement: Inbound on router BR4 Fa0/1
Security Policy 6: No traffic is permitted from workstations at the remote site to workstations at the main
site.
Firewall Rule: Deny all IP protocols from users on the 10.1.1.0/24 to the 10.3.1.0/24 network.
Access List statement(s): deny ip 10.1.1.0 0.0.0.255 10.3.1.0 0.0.0.255
Access List placement: Inbound on router SR1 Fa0/1
Security Policy 7: No Telnet traffic is permitted from the remote site workstations to any devices, except their local switch.
Firewall Rule: Deny all TCP traffic from users on the 10.1.1.0/24 network on port 23.
Access List statement(s): deny tcp 10.1.1.0 0.0.0.255 any eq 23
Access List placement: Inbound on router SR1 Fa0/1
 
Step 4: Create Extended ACLs
a. Review the access list placement information that you created to implement each of the
FilmCompany security policies. List all of the different access list placements that you noted above.
____________ Inbound on router SR1 Fa0/1
____________ Inbound on router BR4 Fa0/1
Based on the placement information, how many access lists do you have to create?
On Router SR1 _______ 1
On Router Edge2 _____ 0
On Router BR4 _______ 1
b. Based on the access list statements you developed in Task 3, create each access list that is needed
to implement the security policies. When creating access lists, remember the following principles:
  • Only one access list can be applied per protocol, per direction on each interface.
  • Access list statements are processed in order.
  • Once an access list is created and applied on an interface, all traffic that does not match any access list statement will be dropped.
c. Use a text file to create the access lists, or write them here. Evaluate each access list statement to
ensure that it will filter traffic as intended.
Access list to be placed on SR1 Fa0/1 inbound:
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 80
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 range 20 21
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 25
permit tcp 10.1.1.0 0.0.0.255 host 172.17.1.1 eq 143
deny ip 10.1.1.0 0.0.0.255 host 172.17.1.1
deny ip 10.1.1.0 0.0.0.255 10.3.1.0 0.0.0.255
deny tcp 10.1.1.0 0.0.0.255 any eq 23
permit ip any any
Access list to be placed on BR4 Fa0/1 inbound:
deny ip 10.3.1.0 0.0.0.255 10.1.1.0 0.0.0.255
permit ip any any
Why is the order of access list statements so important?
untuk mengurangi beban prosesor router dan menurunkan latency

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Tag Cloud

%d bloggers like this: